506 Configuring Routing
The OSPF area is defined and configured.
Displaying an OSPF Area Configuration
1.
Open the
OSPF Area Configuration
page.
2.
Select the OSPF area to display from the drop-down menu.
The OSPF area configuration is displayed for this area.
Deleting an OSPF Area Configuration
Use these steps to delete NSSA configuration or Stub area configuration.
1.
Open the
OSPF Area Configuration
page.
2.
Select the OSPF area configuration to delete from the drop-down menu.
The configuration displays.
3.
Click
Delete
.
The OSPF area configuration is removed.
Configuring OSPF Area CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
To Next Page
Loading...
