Dell PowerConnect 8024 User Guide

512 Configuring Routing
• Invalid Destination Address — The number of OSPF packets discarded because the packet's
destination IP address is not the address of the ingress interface and is not the AllDrRouters or
AllSpfRouters multicast addresses.
•
Wrong Authentication Type — The number of packets discarded because the authentication type
specified in the OSPF header does not match the authentication type configured on the ingress
interface.
•
Authentication Failure — The number of OSPF packets dropped because the sender is not an existing
neighbor or the sender's IP address does not match the previously recorded IP address for that
neighbor.
•
No Neighbor at Source Address — The number of OSPF packets dropped because the sender is not an
existing neighbor or the sender's IP address does not match the previously recorded IP address for that
neighbor.
•
Invalid OSPF Packet Type — The number of OSPF packets discarded because the packet type field in
the OSPF header is not a known type.
•
Hellos Ignored — The number of received Hello packets that were ignored by this router from the new
neighbors after the limit has been reached for the number of neighbors on an interface or on the
system as a whole.
•
Hellos Sent — The number of Hello packets sent on this interface by this router.
•
Hellos Received — The number of Hello packets received on this interface by this router.
•
DD Packets Sent — The number of Database Description packets sent on this interface by this router.
•
DD Packets Received — The number of Database Description packets received on this interface by
this router.
•
LS Requests Sent — The number of LS Requests sent on this interface by this router.
•
LS Requests Received — The number of LS Requests received on this interface by this router.
•
LS Updates Sent — The number of LS updates sent on this interface by this router.
•
LS Updates Received — The number of LS updates received on this interface by this router.
•
LS Acknowledgements Sent — The number of LS acknowledgements sent on this interface by this
router.
•
LS Acknowledgements Received — The number of LS acknowledgements received on this interface
by this router.
Displaying OSPF Interface Statistics
1. Open the OSPF Interface Statistics page.
2. Select the interface for which data is to be displayed from the drop-down menu.
Statistics for this interface display.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries