594 Configuring Routing
Figure 9-58. Loopbacks Summary
The Loopbacks Summary page displays the following fields:
•
Loopback Interface
— The ID of the configured loopback interface.
•
Addresses
— A list of the addresses configured on the loopback interface.
Displaying the Loopbacks Summary Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• Loopback Interface Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-44. Loopback Summary Command
CLI Command Description
show interface loopback Displays information about configured loopback interfaces.
To Next Page
Loading...
