Dell PowerConnect 8024 - Page 630

630 Configuring IPv6
Configuring OSPFv3 Area
1. Open the OSPFv3 Area Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes .
The configuration is saved and the device is updated.
The web page reappears with
Create Stub Area and NSSA Create buttons.
Figure 10-17. OSPFv3 Area Configuration - Create Stub Area and NSSA Create
Configuring OSPFv3 Stub Area
1. Open the OSPFv3 Area Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes .
The web page reappears with
Create Stub Area and NSSA Create buttons. See Figure 10-17.
4. Click Create Stub Area.
The
Stub Area Information fields display.
Figure 10-18. OSPFv3 Stub Area Configuration