Dell PowerConnect 8024 - Page 662

662 Configuring IPv6
Figure 10-33. IPv6 Route Preferences
The IPv6 Route Preferences page contains the fields shown below. In each case, the lowest values
indicate the highest preference.
• Local — This field displays the local route preference value.
•
Static — The static route preference value in the router. The default value is 1. The range is 1 to 255.
•
OSPF Intra — The OSPF intra route preference value in the router. The default value is 110.
•
OSPF Inter — The OSPF inter route preference value in the router. The default value is 110.
•
OSPF External — The OSPF External route preference value in the router (OSPF Type-1 and OSPF
Type-2 routes). The default value is 110.
Configuring IPv6 Route Preferences
1. Open the IPv6 Route Preferences page.
2. Configure the default preference for each protocol.
3. Click Apply Changes .
Route preferences are configured for IPv6, and the device is updated.