Configuring Quality of Service 683
match protocol Adds to the specified class definition a match condition based on the
value of the IP Protocol field in a packet using a single keyword
notation or a numeric value notation.
match source-address mac Adds to the specified class definition a match condition based on the
source MAC address of the packet.
match srcip Adds to the specified class definition a match condition based on the
source IP address of a packet.
match srcip6 Adds to the specified class definition a match condition based on the
source IPv6 address of a packet.
match srcl4port Adds to the specified class definition a match condition based on the
source layer 4 port of a packet using a single keyword, a numeric
notation, or a numeric range notation.
match vlan Adds to the specified class definition a match condition based on the
value of the layer 2 VLAN Identifier field.
mirror Mirrors all the data that matches the class defined to the destination
port specified
police-simple Establishes the traffic policing style for the specified class.
redirect Specifies that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
show class-map Displays all configuration information for the specified class.
Table 11-5. Policy Class Configuration Commands
(continued)
CLI Command Description
To Next Page
Loading...
