Dräger Isolette C2000 - Page 374

Top Shell Assembly and Barn Door Shell Assembly (Series 00, 01, and 02 Model Only)
Chapter 5: Parts List
Isolette® Infant Incubator (Model C2000) Service Manual Page 5 - 73
5
Table 5-17. Top Shell Assembly and Barn Door Shell Assembly
(Series 00, 01, and 02 Model Only)
Item Number Part Number Quantity Description
1 83 901 20 1 Kit, replacement motor, C2000
2 83 100 60 1 Wiring harness assembly, AC
3 68 230 24 4 Isolator, vibration, 0.44" outside diam-
eter, 0.44" long, 4 lb
4 83 900 24 2 Retrofit kit, tilt mechanism
5 83 110 85 2 Knob assembly, mattress tilt (for use
on the standard shell assembly only)
6 83 110 20 2 Knob, mattress tilt (for use on the
barn door shell assembly only)
7 83 110 21 2 Shaft, knob (for use on the barn door
shell assembly only)
8 83 102 80 1 Probe, impeller movement detection
9 83 100 48 1 Cable assembly, AC harness to con-
troller
10 83 100 53 1 Cable assembly, incubator motor to
controller
11 83 100 49 1 Cable assembly, sensor module to
controller
12 99 031 05 4 Screw, #8-32 x 5/16", truss, phillips,
stainless steel
13 99 031 53 2 Screw, #8-32 x 3/8", cap, socket,
stainless steel, Nylok®
a
14 99 040 91 6 Screw, #10-32 x 5/16", pan, phillips,
steel, zinc-plated, Nylok®
15 99 122 92 4 Washer, lock, internal, #8 stainless
steel
16 99 105 34 2 Nut, hex, #6-32, keps, steel, zinc-
plated
17 83 100 09 2 Plate, mounting, Hall effect
18 99 127 79 2 Washer, flat, 0.516" inside diameter,
0.88" outside diameter, 0.01" thick,
nylon
19 99 182 61 2 Ring, retaining, external “E”, stainless
steel