Controller Enclosure Assembly
Chapter 5: Parts List
Isolette® Infant Incubator (Model C2000) Service Manual Page 5 - 87
5
Table 5-22. Controller Enclosure Assembly
Item Number Part Number Quantity Description
1 83 020 93 1 Cable assembly, power switch, Air-
Shields® controller
2 83 020 80 1 Enclosure, controller
3 83 020 92 1 Cable assembly, International Elec-
trotechnical Commission (IEC) con-
nector, Air-Shields® controller
4 99 010 70 2 Screw, #4-40 x ¼", flat, phillips, stain-
less steel, Nylok®
a
a. Nylok® is a registered trademark of Nylok Fastener Corporation.
5 99 122 19 1 Washer, lock, internal, #6, stainless
steel
6 99 105 02 1 Nut, hex, #6-32, stainless steel
7 99 122 16 1 Washer, lock, split, #6, stainless steel
8 99 010 36 1 Screw, #4-40 x 3/16", truss, phillips,
stainless steel
9 99 121 35 1 Washer, lock, internal, #4, stainless
steel
10 17 731 50 1 Terminal, male, double, right angle,
¼" tab
11 83 020 07 1 Insulator, controller case
12 99 103 00 4 Nut, hex, #4-40, stainless steel
13 Reference only As required
Loctite®
b
adhesive #222
b. Loctite® is a registered trademark of Loctite Corporation.
14 99 160 18 4 O-ring, 3/32" x 7/32" x 1/16", nitrile
15 83 020 91 1 Fan assembly, Air-Shields® controller
16 83 020 94 1 Gasket, fan
To Next Page
Loading...
Need help?
General
