Humidity System Assembly (P/N 83 610 70/80/90) (Accessory)
Chapter 5: Parts List
Isolette® Infant Incubator (Model C2000) Service Manual Page 5 - 123
5
Table 5-36. Humidity System Assembly (P/N 83 610 70/80/90)
(Accessory)
Item Number Part Number Quantity Description
1 83 900 10 1 Replacement kit, humidity reservoir
2 83 610 03 1 Door, humidity
3 83 612 04 1 Tubing, with ends, ¼" inside diame-
ter, 24.00" long
4 83 611 70-R 1 Replacement housing/float assembly
5 83 612 50-R 1 Evaporator reservoir assembly, 120V
(for use with 120V model only)
6 83 612 51 1 Evaporator reservoir assembly, 240V
(for use with 240V model only)
7 83 612 52 1 Evaporator reservoir assembly, 100V
(for use with 100V model only)
8 83 612 37 1 Cap, evaporator
9 83 610 17 1 Washer, flat, 1.29" outside diameter,
0.88" inside diameter, 0.015" thick,
stainless steel
10 83 610 18 1 Washer, flat, 2.0" outside diameter,
0.99" inside diameter, 0.06", polypro-
pylene
11 83 500 06 1 Overlay, humidity drawer, English/
Spanish/French/German/Italian
12 83 612 03 1 Elbow, street, 1/8" National Pipe
Thread (NPT), brass, nickel-plated
13 83 610 04 1 Trim, humidity tray
14 99 023 03 2 Screw, #6-32 x 5/16", truss, phillips,
stainless steel, Nylok®
a
15 83 500 34 2 Label, manual reference symbol
16 26 605 00 1 Bumper, rubber, recessed (with
washer)
17 99 023 05 2 Screw, #6-32 x 5/16", pan, phillips,
stainless steel, sems external
18 83 995 06 1 Model/series number log, humidity
system, C2000
19 99 010 67 1 Screw, #4-40 x ¼", truss, phillips,
stainless steel, Nylok®
To Next Page
Loading...
Need help?
General
