Chapter 3 Image Quality Troubleshooting
3.5 Image Quality FIP
3-21
FIP-P8 "Cyclic toner on non-print part"
P8
Phenomenon/Initial check Print sample
Toner is detected in some non-print parts.
(This occurs cyclically at the same intervals.)
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
transformation, dirt or foreign object?
- Major check parts -
Drum/toner cartridge (PL10.1.2)
Item Check
Action
(at occurrence of error)
1
Measure the cyclic interval. For 95mm, 44mm, or 48mm,
replace the Drum/toner cartridge.
To Next Page
Loading...
