Chapter 6 General
6.1 Specifications
6-13
6.1.12 Controller Specifications
6.1.12.1 External Interface
1) USB
*1 : Supports after Windows98SE
2) IEEE1284
6.1.12.2 Decomposer
6.1.12.3 Job Control Function
1) Canceling Printing
A job in progress can be canceled (aborted) from the Control Panel.
2) Job Recovery
When a paper jam causes a job to fail, the job will resume automatically when the jammed paper
is removed and re-start.
3) Job Timeout
When a pause occurs for a period of time (can be changed or indefinite) during a job transfer, the
data transferred halfway will be aborted as an error.
Item Specifications
Connector Type B x1
Protocol Compliance with USB 2.0. High Speed capable
Support Client
Windows98
*1
/Me/2000/XP/2003 Server, USB standard device
Item Specifications
Connector Centronics 36pin x1
Protocol Standard/nibble/ECP
Support Client Windows98/Me/NT4.0/2000/XP/2003 Server, standard device
Sizes that can be used Maximum Size: 297mm x 420mm
Non-printable conditions Not printable within 5mm from all 4 edges
For DL: Not printable within 6.1mm from left/right edges and
4mm from top/bottom edges
Printable Area Maximum Size: 287mm x 410mm
Image Quality Guaranteed
Area
Same as Printable Area
To Next Page
Loading...
Need help?
General
