Chapter 2 Troubleshooting
2.4 How to use PC Diag.
2-55
2.4.1.9.11 REGI. ROLL CLUTCH TEST (Diagnostic Code 14)
This function checks clutch operation for REGI. Roll.
Use the up arrow, down arrow, left arrow, and right arrow keys to select [Regi Roll Clutch Test]
and press the [Enter] key; the solenoid operation runs for a predetermined time.
CAUTION
When the Main Motor runs, the Regi. Roll also rotates. Take care that
fingers are not caught.
The state of operation is displayed on the lower right of screen.
Press the [Esc] key, return to the DIAGNOSTIC MODE MENU.
To Next Page
Loading...
Need help?
General
