Chapter 2 Troubleshooting
2.4 How to use PC Diag.
2-56
2.4.1.9.12 SINGLE SELF PRINT TEST (Diagnostic Code 15)
This function prints one test pattern built in the device for operation check.
Use the up arrow, down arrow, left arrow, and right arrow keys to select [Single Self Print Test]
and press the [Enter] key; the screen below appears.
Then press the [Enter] key again; the system checks whether paper exists from Feeder, and
feeds papers from a Feeder having papers, then starts printing.
Press the [Esc] key, return to the DIAGNOSTIC MODE MENU.
To Next Page
Loading...
