Chapter 4 Disassembly/Assembly and Adjustment
4.2 Disassembly/Assembly
4-14
REP2.3 GUIDE SIDE L 250 CL (PL2.1.13)/GUIDE SIDE R 250 CL (PL2.1.15)
<Removal>
1) Remove the CASSETTE ASSY 250 CL from the printer.
2) Release two hooks of the LOCK BOTTOM L 250 and remove the LOCK BOTTOM L 250 to right.
3) Release two hooks of the LOCK BOTTOM R 250 and remove the LOCK BOTTOM R 250 to left.
CAUTION
Be careful not to lose the SPRING LIFT 250 in the procedure below.
4) Erect the PLATE ASSY BOTTOM 250 and remove it upward.
5) Remove a screw (gold, with flange, tapping, 6mm) securing the GEAR GUIDE SIDE and detach
the GEAR GUIDE SIDE.
6) Move the GUIDE SIDE L 250 CL to the right end and the GUIDE SIDE R 250 CL to the left end.
Then lift the left side of the GUIDE SIDE L 250 CL and the right side of the GUIDE SIDE R 250 CL.
7) While lifting the GUIDE SIDE L 250 CL and GUIDE SIDE R 250 CL, return the guides to left and
right respectively and detach their tips.
5)
To Next Page
Loading...
