Chapter 1 Service Call Procedure
1.3 TRIM Servicing
1-5
1.3 TRIM Servicing
TRIM Servicing for DocuPrint 2050 is performed in all SM/UM to maintain the performance of the
machine. Independent visits for TRIM Servicing does not take place.
1.3.1 TRIM Servicing Procedure
1. Check overall operation before servicing.
Make print and check the print quality.
2. Clean the interior of the machine
Clean toner residues and paper powder etc. in the paper delivery system.
(Clean especially the operation section of the operator.)
3. Inspect parts that require periodic replacement (consumables) and replace them if necessary.
4. Safety Precautions
Check the connection of the power plug and any damage on the cord and the plug.
5. Check the overall operation after servicing as follows:
Check machine operation.
Check the print quality.
Check the billing meter reading.
To Next Page
Loading...
Need help?
General
