Chapter 4 Disassembly/Assembly and Adjustment
4.2 Disassembly/Assembly
4-62
REP8.6 FRAME ASSY FRONT (PL8.1.1)
<Removal>
1) Pull the LEVER FRONT R (PL8.1.11) and LEVER FRONT L (PL8.1.12) toward you and open the
COVER ASSY FRONT.
2) Remove the COVER ASSY STACK CL. (REP1.7)
CAUTION
Be careful not to damage the FFC OPP CL (PL1.1.21) in the procedure
below.
3) Remove the COVER ASSY TOP CL with the FFC OPP CL. (REP1.4)
4) Remove the COVER SIDE LEFT CL. (REP1.1)
5) Remove the COVER ASSY RIGHT CL. (REP1.2)
6) Remove the COVER FRONT LEFT. (REP3.7)
7) Remove the COVER FRONT RIGHT. (REP3.6)
8) Remove the FRAME BASE RTD TRAY HN. (Refer to REP 3.5)
9) Remove the TRAY ASSY FRONT CL. (REP3.8)
10) Remove the FRONT UNIT. (REP3.1)
11) Remove a screw (gold, with washer, 6mm) securing the FRAME ASSY FRONT and remove the
three screws (gold, with flange, tap, 8mm) on the front side.
12) Release the two hooks of FRAME DUPLEX (PL3.1.2) and remove the FRAME ASSY FRONT.
To Next Page
Loading...
Need help?
General
