Chapter 2 Troubleshooting
2.4 How to use PC Diag.
2-58
2.4.1.9.14 CHARGE ROLL DC TEST (Diagnostic Code 18)
This function applies DC voltage to the Charge Roll.
WARNING
Take great care that you do not receive an electric shock because the
DC voltage is high.
Use the up arrow, down arrow, left arrow, and right arrow keys to select [Charge DC Test] and
press the [Enter] key; the screen below appears.
Then press the [Enter] key again to execute this processing.
The state of operation is displayed on the lower right of screen.
Press the [Esc] key, return to the DIAGNOSTIC MODE MENU.
To Next Page
Loading...
