Hioki 8835-01 - Page 107

85
────────────────────────────────────────────────────
5.2 Making Settings
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
Method 2 (Any recording length mode)
Screen: STATUS 1, DISPLAY
1. Call up the STATUS 1 or DISPLAY screen.
2. Move the flashing cursor to the shot item, as
shown in the figure on the left.
3. Set the any recording length mode.
4. Use the
JOG control or the function keys to
make the selection. Use the cursor keys to
change the column.
: Value up
: Value down
: Set the fixed recording length mode.
: Set the any recording length mode.
・On the DISPLAY screen, the setting cannot be
made with the
JOG control.
・When time axis range is between 10 ms -
200 ms/DIV and recording length is set to
CONTINUOUS, printer defaults to OFF.