Hioki 8835-01 - Page 14

ii
────────────────────────────────────────────────────
Inspection
────────────────────────────────────────────────────
Options
9540-01 FUNCTION UP DISK
8936 ANALOG UNIT
8937 VOLTAGE/TEMP UNIT
8938 FFT ANALOG UNIT
8939 STRAIN UNIT
8940 F/V UNIT
8946 4 ch ANALOG UNIT
8947 CHARGE UNIT
9439 DC POWER ADAPTER
9221 RECORDING PAPER (10 rolls)
9557 RS-232C CARD
9558 GP-IB CARD
9559 PRINTER CARD
9333 LAN COMMUNICATOR
9335 WAVE PROCESSOR
9626 PC CARD 32 M
9627 PC CARD 64 M
9726 PC CARD 128 M
9727 PC CARD 256 M
9728 PC CARD 512 M
9729 PC CARD 1 G
9578 10BASE-T LAN CARD
9388 CARRYING CASE
9320 LOGIC PROBE
9321 LOGIC PROBE
9322 DIFFERENTIAL PROBE
9324 POWER CORD (for logic connector)
9325 POWER CORD (for the 8940 F/V UNIT sensor connector)
9303 PT *
9197 CONNECTION CORD (for high voltage, maximum input voltage 500 V)
9198 CONNECTION CORD (for low voltage, maximum input voltage 300 V)
9199 CONVERSION ADAPTOR
9217 CONNECTION CORD (insulated BNC to insulated BNC)
9318 CONVERSION CABLE (for 9270, 9271, 9272, 9277, 9278 and 9279)
9319 CONVERSION CABLE (for 3273)
9305 TRIGGER CORD
220H PAPER WINDER
3273 CLAMP ON PROBE
3273-50 CLAMP ON PROBE
9018-10 CLAMP ON PROBE (10 to 500 A, 40 Hz to 3 kHz)
9132-10 CLAMP ON PROBE * (20 to 1000 A, 40 Hz to 1 kHz)
9270 CLAMP ON SENSOR * (20 A, 5 Hz to 50 kHz)
9271 CLAMP ON SENSOR * (200 A, 5 Hz to 50 kHz)
9272 CLAMP ON SENSOR * (20/200 A
, 5 Hz to 10 kHz)
9277 UNIVERSAL CLAMP ON CT (20 A, DC to 100 kHz)
9278 UNIVERSAL CLAMP ON CT (200 A, DC to 100 kHz)
9279 UNIVERSAL CLAMP ON CT * (500 A, DC to 20 kHz)
9555 SENSOR UNIT * (used with the 9270 to 9272, and the 9277 to 9279)
*: Not complied with the CE marking