Hioki 8835-01 - Conversion Ratio Scaling Method

190
────────────────────────────────────────────────────
8.6 Using the Analog Trigger Function
────────────────────────────────────────────────────
0V
0.95
s
1.05
s
1.2
s
1.1
s
Within the
period rang
e
R
eference voltag
e
Upper limit o
f
the period
Within the
period rang
e
Example
In order to cause triggering when the signal as shown in the figure below leaves
the period range of 0.9 to 1.1 s, the following settings are made:
Lower limit of the period: 900 ms, Upper limit of the period: 1.1 s,
Reference voltage: 0.000 V