Hioki 8835-01 - Page 29

7
────────────────────────────────────────────────────
1.3 Identification of Controls and Indicators
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
HELP key Provides on-line help.
PRINT key Serves to print out stored waveforms.
COPY key Serves to print out a hard copy of the current screen
display.
FEED key Causes the printer paper to advance for as long as the
key is pressed.
CURSOR keys These keys serve to move the flashing cursor in the four
directions.
Open auto range function.
Select key Selects the function that is controlled by the
JOG/SHUTTLE knob. With each push of the key, the
functions is toggled between WAVE and A.B CSR. The
respective LED lights up.
JOG key Rotary control knob that serves to change values, move
the A/B cursors, and scroll the waveform.
SHUTTLE key Concentric ring that serves to move the A/B cursors, and
to scroll the waveform. The speed of movement is
proportional to the rotation angle.
MANU TRIG key Serves to cause manual triggering.
VIEW key Serves to indicate the position of the currently displayed
screen information in relation to the entire recording
length.
F1 - F5 keys Serve to select setting items.
LCD screen
START key Initiates the measurement and analysis. During
measurement, the LED above the key is lit.
STOP key Stops measurement and analysis.
INPUT RANGE key Serves to set the voltage axis range for each channel.
POSITION key Serves to set the zero position for each channel.
CH SELECT key Switches selected channel window.
TIME/DIV key Serves to set the speed for inputting and storing the
input signal.