Hioki 8835-01 - RMS Recorder Function Specifications

291
────────────────────────────────────────────────────
13.4 Storing, Retrieving and Deleting Data on the Floppy Disk or PC Card
────────────────────────────────────────────────────
Media Type
Limit
Root Sub
FD
720 K 112 5000
1.2 M 192 5000
1.44 M 224 5000
PC card Flash ATA 512 to 102
4
5000
WAVE (Binary)
SET (Setting)
MEM REC RMS
Function
○ ○ ○ ○
Time axis range
○ ○ ○ ○
Recording length
△ △ △ ○
Format
△ △ △ ○
Roll mode
△ ○
Overlay
△ ○
Printer format
△ △ △ ○
Smooth print
△ ○
Auto print
△ ○
Auto save
△ △ △ ○
Trigger settings
△
(*2)
△
(*2)
△
(*2)
○
Directory and file numbers available for saving
File contents
The file contents depend on the file type.
○: The data is saved to the file. Settings for the 8835-01 are always enabled
during reading.
△
(*1)
: The data is saved to the file. During reading, settings for the 8835-01
are enabled only in case of "new load."
×: The data is not saved to the file.
*1: When the waveform data functions in the 8835-01 are the same as those to
be read and all settings on the 8835-01 are to be enabled, deletes the
waveform data from the unit and load the new data.
*2: Trigger settings for each channel: ○
Other trigger settings: △