Hioki 8835-01 - Recorder Function Specifications

290
────────────────────────────────────────────────────
13.4 Storing, Retrieving and Deleting Data on the Floppy Disk or PC Card
────────────────────────────────────────────────────
Extensio
n
Meaning
MEM Memory recorder binary data file Yes
REC Recorder binary data file Yes
RMS RMS recorder binary data file Yes
XYC X-Y CONT recorder binary data fil
e
Yes
SEQ* Sequential save index file Yes
MUL* Multi-block index file Yes
TXT Text data file No
SET Setting data file Yes
ARE* Waveform decision area Yes
BMP Bitmap (.bmp) file No
FFT* FFT binary data file Yes
R_M* Recorder and memory index file Yes
Yes: Files can be read into the unit.
No: Reading is not possible.
*: Advanced version
Auto save Waveform data, screen data Parameter calculation resul
t
［AUTO .Extension］
［AUTO1 .Extension］
↓
［AUTO10 .Extension］
↓
［AUTO100 .Extension］
↓
［AUTO5000.Extension
］
［NONAME .Extension］
［NONAME1 .Extension］
↓
［NONAME10.Extension］
↓
［NONAM100.Extension］
↓
［NONA5000.Extension］
［MEASURE .TXT］
［MEASURE1.TXT］
↓
［MEASUR10.TXT］
↓
［MEASU100.TXT］
↓
［MEAS5000.TXT］
NOTE
File name extension
If no file name extension (3 characters after period) is entered, the following
extensions are automatically assigned, according to the stored data type.
Automatic file name assignment
If the file name is entered as a blank ( . ), it is assigned automatically
according to the following principle.
In automatic save, file is titled with a number following the file name
specified in the STATUS screen of each function. Leaving the file name
untitled in the STATUS screen enters AUTO in file name.