APPENDIX20
────────────────────────────────────────────────────
Appendix 5 Waveform Viewer (Wv)
────────────────────────────────────────────────────
In the Windows Start menu, select [Programs] - [HIOKI] - [Wv]. This starts
the waveform viewer application.
To close the waveform viewer application, in the [File] menu select [Exit]. You
can also click the Close button at the top right corner of the window.
Toolbar
Click the icons in the toolbar for the respective functions.
From the left, these are: [Open], [Save All], [Save Between Cursors], [Batch
Conversion], [Properties], [Wave Control Panel], [Trace], [Zoom Out], [Zoom
In], and [Exit].
For details of these operations, see the descriptions of the corresponding menu
items.
You can also select the magnification factor for the time axis by selecting on
the toolbar.
Status bar
The status bar shows, from the left, the model name, function, recording
length, time axis, trigger time, pre-trigger and judgment result.
Version information
When making inquiries, the version number will be required.
To check the software version number, in the [Help] menu select [About Wv].
To Next Page
Loading...
