28
────────────────────────────────────────────────────
2.7 Loading Recoding Paper
────────────────────────────────────────────────────
Printer exit slo
2. Raise the head up/down lever.
3. Insert the attachments into the ends of the roll of recording paper and set
the paper into its holder.
4. Insert the leading edge of the recording paper from above into the gap
behind the printer roller, and pull it out to the other side.
5. Pull the end of the recording paper out at least 10 cm, and make sure that
it is positioned quite straight.
6. Put down the head up/down lever.
To Next Page
Loading...
