Hioki 8835-01 - Page 6

6.3 Settings on the Display Screen 114
6.3.1 Setting Compression Along the Time Axis 114
6.4 Start and Stop Measurement Operation 114
6.5 Print Examples 115
Chapter 7 Input Channel Settings 117
7.1 Overview 117
7.2 Selecting Channels (Memory Recorder Function Only) 117
7.3 Making the Settings of the 8936 ANALOG UNIT 118
7.3.1 Setting the Waveform Display Color 118
7.3.2 Setting the Waveform Display Graph Type
120
7.3.3 Setting the Voltage Axis Range
121
7.3.4 Setting the Input Coupling
122
7.3.5 Setting the Magnification/Compression Ratio Along the
Voltage Axis
123
7.3.6 Setting the Zero Position
124
7.3.7 Zero Adjustment
126
7.3.8 Configuring Baseline Offset
127
7.3.9 Setting the Low-Pass Filter
129
7.4 Making the Settings of the 8937 VOLTAGE/TEMP UNIT 130
7.4.1 Setting Input for the VOLTAGE/TEMP UNIT 130
7.4.2 Making the Settings of Voltage Measurement
131
7.4.3 Making the Settings of Temperature Measurement
132
7.5 Making the Settings of the 8938 FFT ANALOG UNIT 135
7.5.1 Settings 135
7.5.2 Setting the Anti-aliasing Filter (Advanced Version)
135
7.6 Making the Settings of the 8939 STRAIN UNIT 137
7.6.1 Setting the Waveform Display Color 137
7.6.2 Setting the Waveform Display Graph Type
137
7.6.3 Setting the Measurement Range
137
7.6.4 Auto-balancing
138
7.6.5 Setting the Magnification/Compression Ratio Along the
Measurement Range
139
7.6.6 Setting the Zero Position
140
7.6.7 Setting the Low-Pass Filter
140
7.7 Making the Settings of the 8940 F/V UNIT 141
7.7.1 Settings 141
7.7.2 Setting for Measuring Frequency
142