56
────────────────────────────────────────────────────
4.2 Making Settings
────────────────────────────────────────────────────
(4) X-Y (dot), (line)
Assign any analog channel to the X axis and the other seven channels to the Y
axis to form the combined plot.
Method Screen: STATUS 1
1. Call up the STATUS 1 screen.
2. Move the flashing cursor to the format item,
as shown in the figure on the left.
3. Use the function keys to select the display
format.
: Single
: Dual
: Quad
: X-Y (dot)
: X-Y (line)
4. Set the graph display position and the X-Y
plot. See Section 7.7.2.
To Next Page
Loading...
