Wireless configuration
Radio configuration
4-8
Radio configuration
To define configuration settings for a radio, select Controller > Controlled APs >>
Configuration > Radio list. This opens the Product radios page which lists all radios on all
AP models. For example:
To configure the radios for a product, select the product in the list. This opens the Radio(s)
configuration page. The contents of this page varies depending on the product. The following
screen shots show the Radio(s) configuration page for various products.
In each case, Operating mode is set to Access Point and Local Mesh, and Advanced
wireless settings has been expanded to show the complete set of configurable settings.
To Next Page
Loading...
Need help?
General
