To Next Page

To Previous Page

Working with RADIUS attributes

Colubris AV-Pair - Site attribute values

15-59

Setting the URLs of other AV-Pair values

This feature will redefine the URLs in the following AV-Pair values, if they have the same

hostname as is specified for the primary-web-server-status-url:

 login-url

 welcome-url

 goodbye-url

 logout-url

 login-err-url

 ipass-login-url

For example, if the following values are defined:

primary-web-server-status-url=https://srv1.abc.com/status.html

secondary-web-server-status-url=https://srv2.abc.com/status.html

welcome-url=http://srv1.abc.com/mywelcome.html

 If the primary server is up, then the URLs are not changed.

 If the primary server is down and the secondary server is up, then login-url and welcome-

url are changed as follows:

welcome-url=http://srv2.abc.com/mywelcome.html

 If both servers are down, then the URLs are not changed.

Redirect URL

The redirect-url value is used to specify the target URL for redirection when using an access

list with the REDIRECT action. Only one redirect-url value can be specified in each

controller or user RADIUS account.

When an access list rule with the REDIRECT action is processed, the user’s browser is

redirected to a different HTTP address in this order:

 redirect-url keyword in the user account, if present

 redirect-url keyword in the controller account, if present

 login-url keyword, in the controller account, if present

The URL can contain any of the applicable placeholders defined here.

HP MSM7XX User Manual

Other manuals for HP MSM7XX