User authentication, accounts, and addressing
Introduction
10-7
Switch port not bound to a VSC
When a switch port is not bound to a VSC, the following authentication options are
supported:
802.1X (Switch port)
MAC-based (Switch port)
If both options are enabled at the same time, then:
802.1X takes priority for client stations that are 802.1X enabled. If 802.1X authentication
fails, MAC authentication is not checked and the client station fails to authenticate.
MAC authentication takes priority for client stations that are not 802.1X enabled. If MAC
authentication fails, then the client station fails to authenticate.
User authentication limits
The following limits apply:
Client address is in the list and the
filter is set to allow.
Client access is granted. MAC-based authentication
is not performed.
Client address not in the list. Client access is granted or denied based on result of
MAC-based authentication.
Controller
Maximum
number of
controlled APs
Maximum number
of locally defined
user accounts
Maximum number
of active user
sessions
710 10 500 100
730 40 2000 500
750 200 2000 2000
760 200 2000 2000
765 200 2000 2000
Controller Team 800 2000 2000
Wireless MAC filter setting Result
To Next Page
Loading...
Need help?
General
