NOC authentication
Activating a remote login page with NOC authentication
D-4
Activating a remote login page with NOC
authentication
To activate a remote login page, you must define several controller attributes. These
attributes can be defined in the RADIUS account for the controller (if you are using a
RADIUS server) or they can be locally configured.
The following table summarizes the Colubris-AVPair value strings for the remote login page
with NOC authentication.
The following placeholders can be added to the login-url string.
Item Colubris-AVPair value string
External login
login-url=URL_of_the_page [placeholder]
URL of the remote login page. Access to the Web server hosting this page
must be granted to all unauthenticated users. Do this with an appropriate
access list definition.
NOC certificate
ssl-noc-certificate=URL_of_the_Certificate
Certificate issued to the application on the Web server that sends user
info to the controller for authentication.
NOC CA
certificate
ssl-noc-ca-certificate=URL_of_the_certificate
Certificate of the certificate authority (CA) that issued the NOC
certificate.
Custom SSL
certificate
ssl-certificate=URL_of_the_certificate
Custom certificate installed on the controller.
Placeholder Description
%c
Returns the IP address of the user’s computer.
%d
Returns the WISPr location-ID. Supported for login-url only.
%e
Returns the WISPr location-Name. Supported for login-url only.
%l
Returns the URL on the controller where user login information should be
posted for authentication. By default, this value is URL encoded. (To
enable/disable URL encoding, set the value of url-encode in the
<ACCESS-CONTROLLER> section in the configuration file.)
%n
Returns the NAS ID assigned to the controller. By default, this is the unit’s
serial number. Not supported in local mode.
%s
Returns the RADIUS login name assigned to the controller. By default, this
is the unit’s serial number. Not supported in local mode.
To Next Page
Loading...
Need help?
General
