Working with VSCs
Quality of service (QoS)
5-40
IP QoS
This option lets you assign traffic to the queues based on the criteria in one or more IP QoS
profiles. Each profile lets you target traffic on specific ports or using specific protocols.
Disabled
When QoS traffic prioritization is disabled, all traffic is sent to queue 3.
IP QoS profiles
This option is only available if you set the Priority mechanism to IP QoS.
Select the IP QoS profiles to use for this profile. To add QoS profiles to the list, use the
Network > IP QoS page.
Up to 10 profiles can be selected. To select more than one profile, hold down the CTRL key as
you select profile names in the list.
To define an IP QoS profile
1. Select Controller >> Network > IP QoS. Initially, no profiles are defined.
2. Select Add New Profile.
3. Configure settings as follows:
Settings
Profile name
Specify a unique name to identify the profile.
To Next Page
Loading...
Need help?
General
