Working with RADIUS attributes
Colubris AV-Pair - User attribute values
15-67
Colubris AV-Pair - User attribute values
User values let you define settings for individual user accounts.
Each Colubris AV-Pair value is specified using the following format: <keyword>=<value>
The following table lists all supported user value keywords and provides a link to complete
descriptions for each one.
Access list
An access list is a set of rules that govern how the controller controls user access to
protected network resources (those attached to the controller Internet port). Access lists are
defined in the profile for the controller) and are activated in user profiles as needed.
Only one access list can be activated per user profile. See Access list on page 15-34.
Colubris AV-Pair keyword For more information see
access-list Access list on page 15-67.
ads-presentation Advertising on page 15-68.
bandwidth-level Bandwidth level on page 15-68.
max-output-rate
max-input-rate
Data rate on page 15-69.
one-to-one-nat One-to-one NAT on page 15-69.
use-public-ip-subnet Public IP address on page 15-70.
max-input-packets
max-output-packets
max-input-octets
max-output-octets
max-total-octets
max-total-packets
Quotas on page 15-70.
smtp-redirect SMTP redirection on page 15-71.
polling-arp-interval
polling-max-arp-count
Station polling on page 15-72.
redirect-url Redirect URL on page 15-59.
welcome-url Custom public access interface Web pages on
page 15-72.
goodbye-url Custom public access interface Web pages on
page 15-72.
To Next Page
Loading...
Need help?
General
