Working with controlled APs
Software retrieval/update
6-42
Mu report
Number of Mu reports sent to the Aeroscout engine.
Software retrieval/update
Software management of controlled APs is automatically performed by the controller after
the AP is discovered (see Key controlled-mode events on page 6-4).
If the software version on the AP does not match the version installed on the controller, new
software is installed on the AP by the controller.
For information on how to update the controller software see Software updates on
page 20-4.
Monitoring
The controller provides a series of pages that present monitoring and status information for
controlled APs. You can view these pages for all controlled APs, for all APs in a group, or for
just a specific AP. All options appear on the Overview menu, which can be reached by
selecting:
Controlled APs >> Overview.
Controlled APs > [group] >> Overview.
Controlled APs > [group] > [AP] >> Overview.
See the online help for details about the information provided on these status pages.
To Next Page
Loading...
Need help?
General
