Management
SNMP
2-13
SNMP
The controller provides a SNMP implementation supporting both industry-standard and
custom MIBs. For information on supported MIBs, see the MSM SNMP MIB Reference Guide.
Configuring the SNMP agent
Select Controller >> Management > SNMP to open the SNMP agent configuration page.
By default, the SNMP agent is enabled (SNMP agent configuration in title bar is checked)
and is active on the LAN port. If you disable the agent, the controller will not respond to
SNMP requests.
To Next Page
Loading...
Need help?
General
