LLDP
Configuring LLDP on the controller
17-4
Configuring LLDP on the controller
Controller settings are defined by selecting Controller >> Network > Discovery
protocols.
LLDP agents
Select this option to globally activate LLDP support on the controller.
LAN port / Internet port
For each port, select whether the agent will transmit and/or receive LLDP information. Select
Configure TLVs to customize TLV support for each interface.
Tra nsm it
Enable this option to have the agent transmit LLDP information to its neighbors.
Receive
Enable this option to have the agent accept LLDP information from its neighbors.
LLDP settings
Use these options to define global LLDP settings on the controller.
Transmit interval
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent
to neighboring network devices.
Multiplier
The value of Multiplier is multiplied by the Transmit interval to define the length of Time
to live.
To Next Page
Loading...
Need help?
General
