Working with RADIUS attributes
Colubris AV-Pair - Site attribute values
15-45
By using the following placeholders, you can customize the URL for each controller. This is
useful when you need to update multiple units.
The certificate is encoded using PKCS#12 format, and contains:
the private key of the Web server
the certificate of the Web server
The file is locked using a password.
Note The password with which the certificate was locked must be the same as the password
specified on the Public access > Attributes page. This is the password the controller uses
to login to the RADIUS server.
Example
ssl-certificate=http://www.mycompany.com/%s_certificate
Custom public access interface Web pages
Several options are available to define custom pages.
Loading custom pages from an archive
This option enables you load site files from an external file archive, allowing you to replace
the entire public access Web site in one simple operation. The archive must be in .zip format.
Note The contents of the existing public access site is deleted and replaced by the contents of the
archive (.zip) file. If the archive does not contain a complete set of valid pages, the public
access interface will not function correctly.
Note When unzipped the total size of all files must be less than 1MB.
Syntax
custom-pages=ArchiveURL
Placeholder Description
%n
Returns the NAS ID assigned to the controller. By default, this is its
serial number.
%s
Returns the RADIUS login name assigned to the controller. By
default, this is its serial number.
%i
Returns the domain name assigned to the controller Internet port.
%a
Returns the IP address of the controller Internet port.
To Next Page
Loading...
Need help?
General
