Working with RADIUS attributes
Colubris AV-Pair - Site attribute values
15-63
WISPr redirect page
This keyword lets you define the location of the WISPr redirect page. Use this page to
customize the code that the controller includes in the HTTP redirect sent to a user’s browser.
Syntax
redirect-page=URL_of_page
Where:
If this keyword is not defined, default code is used. To view the default code, open the file
redirect.html, which is available in the Public Access Examples file. See Sample public
access pages on page 14-15.
WISPr access procedure
Specifies the version of the WISPr client access procedure supported by the controller.
access-procedure=procedure_version
Where:
Traffic forwarding (dnat-server)
This keyword defines the external server to which the controller will forward traffic when an
access list rule with the DNAT-SERVER action matches incoming traffic.
Note SSL traffic cannot be forwarded as this breaks SSL security during connection negotiation
resulting in the connection not being established.
Two external servers can be defined with this keyword. A status polling mechanism is
available that enables the controller to determine the status of the external servers and
forward traffic to the one this is operational. To activate the polling mechanism see Multiple
DNAT servers below.
This keyword can be defined directly on the controller or in the controller RADIUS profile.
Syntax
dnat-server=listname,hostname,port[,hostname2,port2]
Parameter Description
URL_of_page
URL of the page containing code to use for WISPr redirect.
Parameter Description
procedure_version
Specify the WISPr client access procedure supported by the
controller. Currently, the controller only supports the value
“1.0”.
To Next Page
Loading...
Need help?
General
