Working with RADIUS attributes
Controller attributes overview
15-4
Controller attributes overview
The controller provides support for a number of standard RADIUS attributes, including those
for authentication and accounting. See Controller attribute definitions on page 15-8 for a
list of these attributes and a brief definition. For detailed information on these attributes,
refer to RFC2865, or the documentation that came with your RADIUS server.
The controller also supports several vendor-specific attributes, including the special HP
attribute (known as the site attribute) that is used to customize the behavior of the public
access interface and define global default values for user accounts. To find out more about
the site attribute, see the following section.
Customizing the public access interface using the
site attribute
HP has defined a vendor-specific RADIUS attribute to support configuration of the public
access interface and user accounts. This attribute conforms to RADIUS RFC 2865 and is
called the Colubris AV-Pair.
Multiple instances of the Colubris AV-Pair attribute can be defined on the controller, each
with a different AV-Pa ir v alu e. For a complete list of all supported AV-Pair values, see
Colubris AV-Pair - Site attribute values on page 15-33.
In order for a third-party RADIUS server to support the Colubris AV-Pair attribute you need
to define it as described under Colubris AV-Pair on page 15-11.
Note The Colubris AV-Pair attribute can be used to define settings on the controller and for users
and administrators. This section discuses controller settings only.
Important The documentation for this product frequently uses the terms site attributes and user
attributes to refer to the Colubris AV-Pair attribute values depending on whether the AV-Pair
attribute values are set with a value that applies to the public access site or to an individual
user.
To Next Page
Loading...
Need help?
General
