Network configuration
IP QoS
3-34
IP QoS
To ensure that critical applications have access to the required amount of wireless
bandwidth, you can classify packets destined for the wireless interface into priority queues
based on a number of criteria. For example, you can use any of the following to place data
packets in one of four priority queues for transmission onto the wireless interface:
TCP source port
UDP source port
Destination port
Port ranges
You configure IP quality of service (QoS) by creating IP QoS profiles that you can then
associate with VSCs or use for global wireless settings. You can configure as many as 32 IP
QoS profiles on the controller. You can associate as many as 10 IP QoS profiles with each
VSC.
Configuration
To view and configure IP QoS profiles, select Controller >> Network > IP QoS. Initially, no
profiles are defined.
To create an IP QoS profile select Add New Profile.
To Next Page
Loading...
Need help?
General
