Working with VLANs
Defining a VLAN
7-4
Defining a VLAN
Once you have created a network profile with a VLAN ID, you can use the profile to define a
VLAN on the controller and APs. Some of the more frequently defined VLANs are listed in the
following table.
Defining a VLAN on a controller port
Define a VLAN on a controller port as follows:
1. Select Controller >> Network > Ports. By default, no VLANs are defined.
To define a VLAN on ... See ...
A controller port Defining a VLAN on a controller port on page 7-4
The ingress mapping in a VSC profile VSC ingress mapping on page 5-16
The egress mapping in a VSC profile VSC egress mapping on page 5-17
The egress network in a VSC binding Binding VSCs to groups on page 6-23
To Next Page
Loading...
