Working with RADIUS attributes
Colubris AV-Pair - Site attribute values
15-44
access-list=faculty,ACCEPT,all,all.all,faculty_internet_use,5000
Enables all other traffic to reach the Internet (via routers on the backbone LAN and the
router in the NOC). If this last rule did not exist, this traffic would be dropped.
Configuration file
The controller can retrieve and load a new configuration file automatically, based on the URL
you specify.
Syntax
configuration-file=URL[placeholder]
Where:
By using the following placeholders, you can customize the URL for each controller. This is
useful when you need to update multiple units.
Custom SSL certificate
The controller can retrieve a custom SSL security certificate to replace the HP certificate that
is included by default.
Syntax
ssl-certificate=URL[placeholder]
Where:
Parameter Description
URL
Specify the URL that points to the new configuration file.
Placeholder Description
%n
Returns the NAS ID assigned to the controller. By default, this is the
unit serial number.
%s
Returns the RADIUS login name assigned to the controller on the
Public access > Attributes page. By default, this is the unit serial
number.
%i
Returns the domain name assigned to the controller Internet port.
%a
Returns the IP address of the controller Internet port.
Parameter Description
URL
Specify the URL that points to the new certificate.
To Next Page
Loading...
Need help?
General
