To Next Page

To Previous Page

NOC authentication

Forcing user logouts

D-13

6. Select Public access > Web server.

7. Enable the NOC-based authentication feature.

8. Under Security add the IP address of the Web server to the Allowed Addresses box.

9. Under Active interfaces make sure that the interface on which the request will be

received is enabled.

10. Select Save.

11. Add the following entries to the Configured attributes table on the Public access >

Attributes page. (You can also define these attributes in the RADIUS profile for the

controller if you are using a RADIUS server.)

access-list=loginserver,ACCEPT,tcp,web_server_IP_address,443

ssl-noc-certificate=URL_of_the_certificate

ssl-noc-ca-certificate=URL_of_the_certificate

transport-page=web_server_URL/newlogin/transport.html

session-page=web_server_URL/newlogin/session.html

fail-page=web_server_URL/newlogin/fail.html

logo=web_server_URL/newlogin/logo.gif

use-access-list=loginserver

Forcing user logouts

Users can be logged out by calling the following URL:

https://controller_ip:8090/goform/HtmlNocLogoutRequest

?ipaddress=user_ip

Note This request must come from the login application (or another other application that is using

the same SSL certificate).

The controller returns a positive or negative answer for the user logout as standard HTML.

HP MSM7XX User Manual

Other manuals for HP MSM7XX