HP MSM7XX User Manual

Management
Management tool
2-7
A typical session looks like this:
127.0.0.1 login: emergency
--------------------------
Emergency Menu
--------------------------
Device information
Serial number: SG9603P004
IP address: 16.90.48.186
Select one of the following options:
1. Reset both the manager username and password to "admin"
0. Exit
Selection: 1
Trying to reset manager login credentials....
Manager login credentials were successfully reset to:
Username = admin
Password = admin
Press any key to continue.
Password security policies
Security policies affect both manager and operator accounts. Select from one of the following
options:
 Follow FIPS 140-2 guidelines: When selected, implements the following requirements
from the FIPS 140-2 guidelines:
 All administrator passwords must be at least six characters long.
 All administrator passwords must contain at least four different characters.
For more information on these guidelines, refer to the Federal Information Processing
Standards Publication (FIPS PUB) 140-2, Security Requirements for Cryptographic
Modules.
 Follow PCI DSS 1.2 guidelines: When selected, implements the following
requirements from the PCI DSS 1.2 guidelines:
 All administrator passwords must be at least seven characters long.
 All administrator passwords must contain both numeric and alphabetic characters.
 The settings under Login control must be configured as follows:
 Lock access after nn login failures must be set to 6 or less.
 Lock access for nn minutes must be set to 30 minutes or more.

HP MSM7XX Specifications

General

Brand	HP
Model	MSM7XX
Category	Controller
Language	English