Wireless configuration
Viewing wireless information
4-35
On the MSM310, MSM320, MSM335, MSM410, MSM422: Scanning is
continuously performed on all the channels in the currently selected Operating
mode, even though the channel is only re-evaluated each time the channel selection
interval expires. (If the interval is set to Disabled, continuous scanning is not
performed.) Continuous scanning can cause interruptions to voice calls. On dual-
radio APs, you can avoid interruptions by setting one radio to operate in monitor
mode. For example, if radio 1 is set to automatic channel scanning and radio 2 is in
monitor mode, scanning occurs on radio 2 and interruptions on radio 1 do not occur.
Viewing wireless information
Viewing all wireless clients
To view information on all wireless client stations, select Controlled APs >> Overview >
Wireless clients.
This page lists all wireless clients associated with all VSCs.
AP name
Name of the AP the with which the client station is associated.
Radio
Radio on the AP that the client station is using.
MAC Address
MAC address of the client station. Select the MAC address to view more detailed infor-
mation on the client.
IP address
IP address assigned to the client station.
SSID
SSID assigned to the client station.
Security
Indicates if the client station has been authorized.
To Next Page
Loading...
Need help?
General
