Working with RADIUS attributes
User attributes
15-13
Framed-IP-Address
(32-bit unsigned integer)
IP Address of the controller LAN port.
NAS-Identifier
(string)
The NAS ID for the RADIUS profile being used.
NAS-Ip-Address
(32-bit unsigned integer)
The IP address of the port the controller is using to communicate with the RADIUS server.
NAS-Port
(32-bit unsigned integer)
Always 0.
NAS-Port-Type
(32-bit unsigned integer)
Always set to 19, which represents WIRELESS_802_11.
User-Name
(string)
The RADIUS username assigned to the controller on the Public access > Attributes page.
Accounting response
No attributes are supported.
User attributes
The controller provides support for a number of standard RADIUS user attributes, including
those for authentication and accounting. See User attribute definitions on page 15-20 for a
list of these attributes and a brief definition. For detailed information on these attributes,
refer to the documentation that came with your RADIUS server.
The controller also supports several vendor-specific attributes, including the special HP
attribute (known as the user attribute) that is used to customize the behavior of the public
access interface and define values for user accounts. To find out more about the user
attribute, see the following section.
Customizing user accounts with the user attribute
HP has defined a vendor-specific RADIUS attribute to support configuration of the public
access interface and user accounts. This attribute conforms to RADIUS RFC 2865 and is
called the Colubris AV-Pair.
To Next Page
Loading...
Need help?
General
