HP MSM7XX User Manual

Working with controlled APs
AeroScout RTLS
6-41
Viewing status information
Basic AP and AeroScout tag status information is available by selecting Controller >
Controlled APs >> Overview > RTLS. For example:
All AeroScout management and monitoring is performed in the AeroScout software itself.
Aeroscout documentation and AeroScout software must be used to operate and monitor the
tags.
AP name
Name of the AP on which HP RTLS is enabled.
AP MAC address
MAC address of the AP.
Radio
Radio on the AP to which the AeroScout tag is connected.
Engine
IP address and port to which the controller sends the tag and Mu reports generated by the AP.
Tag states
Shows two values: admin state / operational state
 Admin state: Indicates if the AeroScout engine requested that the AP process frames
generated by AeroScout tags.
 Oper state: Indicates if the radio is actually listening for frames generated by AeroScout
tags.
Mu states
Shows two values: admin state / operational state
 Admin state: Indicates if the AeroScout engine requested that the AP process Mu (mobile
unit) information.
 Oper state: Indicates if the radio is actually listening for Mu (mobile unit) information.
Tag report
Number of tag reports sent to the Aeroscout engine.
Tag adj msg
Number of tag messages that were dropped because they were received on the wrong
channel.

HP MSM7XX Specifications

General

Brand	HP
Model	MSM7XX
Category	Controller
Language	English