Wireless configuration
Viewing wireless information
4-40
Tx power
Current transmission power.
Transmit protection status
Disabled: HT protection / G protection is disabled.
B clients: G protection is enabled because a B client is connected to the AP.
B APs: G protection is enabled because a B client is connected to another AP on the
same channel used by the AP.
AG clients: HT protection is enabled because a non-HT client is connected to the AP.
AG APs: HT protection is enabled because a non-HT AP is present on the same channel
used by the AP.
Tx multicast octets
The number of octets transmitted successfully as part of successfully transmitted multicast
MSDUs. These octets include MAC Header and Frame Body of all associated fragments.
Tx unicast octets
The number of octets transmitted successfully as part of successfully transmitted unicast
MSDUs. These octets include MAC Header and Frame Body of all associated fragments.
Tx fragments
The number of MPDUs of type Data or Management delivered successfully; i.e., directed
MPDUs transmitted and being ACKed, as well as non-directed MPDUs transmitted.
Tx multicast frames
The number of MSDUs, of which the Destination Address is a multicast MAC address
(including broadcast MAC address), transmitted successfully.
Tx unicast frames
The number of MSDUs, of which the Destination Address is a unicast MAC address,
transmitted successfully. This implies having received an acknowledgment to all associated
MPDUs.
Tx discards wrong SA
The number of transmit requests that were discarded because the source address is not equal
to the MAC address.
Tx discards
The number of transmit requests that were discarded to free up buffer space on the AP. This
can be caused by packets being queued too long in one of the transmit queues, or because too
many retries and defers occurred, or otherwise not being able to transmit (for example, when
scanning).
To Next Page
Loading...
Need help?
General
