Working with controlled APs
Provisioning APs
6-35
The following page will appear on the MSM317.
Interface
Select the interface you want to configure and then define its settings using the other options
on this page. Set VLAN ID if applicable.
Assign IP address via
DHCP client: Address is assigned using a DHCP server. Enable this option to have the
interface act as a DHCP client. The AP sends DHCP requests on the specified VLAN. If no
VLAN is specified, the request is sent untagged.
Static: Select this option to manually assign an IP address to the interface.
Static IP settings
When you select Static for Assign IP address via, configure settings in this box.
IP address: Specify the IP address you want to assign to the interface.
Address mask: Specify the appropriate subnet mask for the IP address you specified.
Default gateway: Specify the IP address of the default gateway.
Local mesh settings
For information on provisioning these settings, see Local mesh on page 13-1.
Enable provisioning here:
To Next Page
Loading...
Need help?
General
