Introduction
About this guide
1-5
Commands and program listings
Monospaced text identifies commands and program listings as follows:
Warnings and cautions
Do not proceed beyond a WARNING or CAUTION notice until you fully understand the
hazardous conditions and have taken appropriate steps.
Warning Identifies a hazard that can cause physical injury or death.
Caution Identifies a hazard that can cause the loss of data or configuration information, create a non-
compliant condition, or hardware damage.
Example Description
use-access-list
Command name. Specify it as shown.
ip_address
Items in italics are parameters for which you must supply
a value.
ssl-certificate=URL [%s]
Items enclosed in square brackets are optional. You can
either include them or not. Do not include the brackets.
In this example you can either include the “%s” or omit it.
[ONE | TWO]
Items separated by a vertical line indicate a choice.
Specify only one of the items. Do not include the vertical
line.
To Next Page
Loading...
Need help?
General
